The client had a vision of the design, and together we chiseled that down to a nicely proportioned king-sized bed that fits well within the space and complements the other furnishings-- the bedroom has tall ceilings and furnishings that are relatively short, so the low slung design of the bed is well suited to the feel of the room. To me, the appeal of the design is in it's simplicity and that the colors and textures of the woods are more complimentary than contrasting; and, the depth of color in the eastern cherry and fiddleback grain in the western maple collaborate beautifully.
Through tenons of any size are a challenge, and with legs more than three inches thick, both parts of the joint are problematic to cut. The mortise cut on the exposed face of the legs is even more critical because any irregularity in the mortise will be visible against the side of the tenon as it protrudes from the leg (while the shoulder of the rail on the inside leg face covers the perimeter of the mortise, so at least one side allows for a little buffer if the chisel operator happens to loose focus and make an errant cut). Because the legs are thicker than the mortise bit is long, the mortise had to be cut from both sides to bore all the way through. (Although, I imagine it would make sense to do it this way regardless, since the tear out of a mortising bit on the back side of a leg would be ragged). A few adjustments to get the mortise machine set square and true made the holes line up nicely. For the tenons, it took longer to build a jig capable of handling a 10" wide tenon than it took to cut the tenons, but it was time well spent because the cuts were precise and the jig will be used again.
Wedges in the tenon ends provide for positive attachment between the legs and rails, and minimize the need for glue. Beds carry significant weight-- weight that sometimes moves around rapidly-- and it is distributed across only a few joints, so the mechanical strength provided by the wedge in a through tenon adds extra durability to an already strong joint. While test fitting all the pieces, I marked where the tenon protruded from the leg, and chamfered the ends with a chisel while disassembled. After the glue-up, it was quick to trim the wedges and touch up the exposed tenon end.
This western maple standing height desk was designed for a human, although consideration was also given to the dogs that often accompanied her to the office. From the perspective of the dogs, the desk is both something to lounge under and the place where treats are kept, the latter being a far more important design element. From the perspective of the human, it was important that the desk have efficient storage that was neither bulky nor cluttered, felt light, was of the scale of her office, and was made of something local and beautiful. In her words:
I want to tell you how happy I am to stand at this desk. It not only works as I hoped it would, but it's REALLY beautiful, which makes me smile daily. Couldn't ask for more. The dogs have become fully acquainted with the special dog treat section and now sit and stare at it, trying to will it open.Thanks for doing such a great job and being so easy to work with.
One of the larger projects to come out of the shop, this included cabinetry throughout the home as part of an extensive remodel. The house is set into a steep lot, and the remodel design by Nir Pearlson Architect took advantage of abundant natural light, and turned a challenging multilevel floor plan into a living space comfortable for day-to-day use that is also open and inviting for entertaining.
Dining room buffet-
Master bedroom wardrobe-
A design of David Schmitz, the wardrobe features a mixture of drawers, open shelves, and clothes hangers concealed behind cherry sliding doors. It was a minor miracle to have found a single piece of cherry for the bottom row of drawer faces (thank you Tree Products), and the continuity of the grain unifies the base of the wardrobe.
Master bath vanity-
Appleply laundry cabinets-
A bathroom remodel, designed by engage:ARCHITECTURE, that features mirrored medicine cabinets backlit by LED's, and cherry vanity cabinet and tub panels. The lighting design is outstanding; and in addition to the visual element, the toe kick lights enhance nighttime accessibility by lighting the floor with a low-intensity source.
The steps are part of an entryway addition, designed by David Schmitz of engage:ARCHITECTURE. The upper step carries through into a bench seat with storage under the lid, and is a welcoming transition into the main living area of the home.
One of the owners previously owned a furniture gallery in Seattle, and a set of candlesticks had stayed with her through the years and remained an important part of their home. The mirrored pyramid design of the candlesticks were the inspiration for the hooks; and, are functional when guests hang their coats, and are otherwise a decorative addition to David's vision and reflective of the clients aesthetic.
The client had been working on the conversion of a garden room into an insulated and heated art studio. The room would still retain the functions of garden tool storage and candle making area, but she also wanted a dedicated space for her multiple mediums of art and where supplies could be stored at close reach.
ApplePly, manufactured right here in Eugene, was an easy material choice. The eastern maple panel faces are perfect for slab doors and drawer fronts, and the uniform laminations make a distinctive exposed edge; and, without any need to face the edges, the cost savings helped keep the budget down. Osmo Polyx oil and wax finish brings out a warm glow in the maple, and creates a durable coating without the high VOC's of most other finishes. Angle iron from the scrap yard was repurposed as drawer and door pulls, and the weathered steel texture is in subtle contrast to the ApplePly.
A western black walnut bed, inspired by elements of Roy McMakin's bed for the Young residence. In particular, Ginger was drawn to the chamfered foot board corners, sturdy proportions, and overall clean design; and with nicely figured local walnut and a book-matched headboard, this has the imprint of the northwest.
The fireplace had been through a couple stages of upgrade before I met the homeowners. The original brick fireplace had been updated to gas and was given a veneer of slate tile prior to their purchase of the home, but the mantle and fireplace surround were left bare. After moving into the home, they picked up a nice live edge black walnut slab from Urban Lumber, and they mounted the slab with the idea that it would be part of the final design.
Though the mantle was temporary, they got the most out of it. I first met clients in October and it was decorated for Halloween. They already were gravitating towards a craftsman styled fireplace, and when I returned in November to go over the first round of designs, the mantle was decorated for Thanksgiving. We further refined the design and looked at wood samples in December, with Christmas stockings hung (by the chimney with care). They took the President's Day holiday off.
The final design was based on something they had found online, and it incorporated craftsman themes that would play well with the existing slate tile. We realized early in the process that the black walnut slab was a bit too short for this mantle (and it was subsequently used as a shelf above a coat rack in the entryway); and locally harvested white oak seemed the perfect choice because it takes stain well and would tie in with other similarly styled furnishings in the living room. The quarter-sawn white oak was treated with a wood dye process followed by a coat of stain to achieve a color similar to the diamond-shaped accent tiles. End grain black walnut plugs provide a bit of subtle geometry to the piece, and a shadow line below the mantle top adds levity (and hidden in the shadow is a groove to hang decorations for the next holiday).
Thankfully, Harry Potter had more room under the stairs than this; and though the space is fairly small and asymmetric, it needed structure. This nook had been used for stereo equipment, but as the homeowner pointed out: a stereo system composed of multiple components connected by wires is quickly becoming an anachronism. Nothing against solid state electronics.
The design is a balance between making efficient use of a relatively small space and creating something that gives the impression of symmetry in an asymmetrical space. The nook is in a hallway, but is adjacent to the kitchen and adds a bit of needed storage for things that don't need to be close at hand. The layout is a mixture of double drawers (one big drawer with an over sized drawer front and a small drawer tucked in above) and a couple doors with adjustable shelves.
Certain purchases stand out because they in some way symbolize reaching a milestone. A house is an obvious and big one; but not far down the list there are more mundane items, such as a washer and dryer or a first never-been-slept-on-by-another-human bed, that mark another rung up the ladder to adulthood. In this case, it is a dresser set of Oregon white oak made for a friend that had recently reached another adult milestone of a first job after college. Technically, a real job.
Curly Burly supplied the quarter-sawn white oak and black walnut lumber for the two piece dresser set: one short and wide with a vanity mirror and the other tall and skinny...and somewhere inside is a removable hidden compartment.